Dual Access (Not Available For Color Faxes) - Brother FAX-2440C User Manual

Dual Access (Not available for color faxes)
You can dial a number, and begin scanning the fax into memory--
even when the machine is sending from memory or receiving faxes.
The LCD shows the new job number and available memory.
_Your machine normally uses Dual Access. However, to send a
color fax, the machine will send the document in real time (even
if
Real Time TX
is
Off).
The number of pages you can scan into the memory will vary
depending on the data that is printed on them.
_o If you get an (but
of
Hemory message while scanning the first
page of a fax, press Stop/Exit to cancel scanning. If you get an
out of Hemory message while scanning a subsequent page,
you can press Black Start to send the pages scanned so far,
or press Stop/Exit to cancel the operation.
SETUPSEND 3-10