Overseas Mode - Brother FAX-2440C User Manual

If you did not use up any of the numbers for Groups, access
codes or credit card numbers, you can 'broadcast' faxes to
as many as 136 (FAX-2440C) or 130 (MFC-620CN) different
numbers.
M The available memory will vary depending on the types of
jobs in the memory and the number of locations used for
broadcasting. If you broadcast to the maximum numbers
available, you will not be able to use Dual Access and
Delayed fax.
M Enter the long dialing sequence numbers as you would
normally, but remember that each One-Touch (FAX-2440C
only) and Speed-Dial number counts as one number, so the
number of locations you can store becomes limited.
m If the memory is full, press Stop/Exit to stop the job or if
more than one page has been scanned, press Black Start
to send the portion that is in the memory.
Overseas Mode
If you are having difficulty sending a fax overseas due to possible
interference on the phone line, we recommend that you turn on the
Overseas Mode. After you send a fax using this feature, the feature
will turn itself off.
t If it is not illuminated in green, press I.r_-_ (Fax).
Load your document.
Press Menu/Set, 2, 2, 7.
[Setup Send
]
Press• or. to selecton (or off).
IV. o_rerseas Mode
]
Press Menu/Set.
SETUPSEND 3-14