Changing The Default Settings; Increasing Print Speed Or Quality; Setting The Paper & Size; Adjusting Brightness - Brother FAX-2440C User Manual

Changing the default settings
You can save the PhotoCapture Center
TM
settings you use most often
by setting them as default. These settings will remain until you
change them again.
Increasing print speed or quality
Press Menu/Set, 4,
1. [PhotoCapture
]
Press • or • to select Normal or
1.
Print Quality
Photo.
Press Menu/Set.
Press Stop/Exit.
Setting the paper & size
Press Menu/Set, 4, 2. ]
]
Press • or • to select
Letter Glossy, 4"x 6" Glossy,
5"x 7" Glossy, A4 Glossy, Letter Plain, A4 Plain,
Letter Inkjet, A4 Inkjet or4"x 6" Inkjet.
Press Menu/Set.
If you selected Letter or A4, press • or • to select the print size
(4"x 3", 5"x 3 .5", 6"x 4", 7"x 5", 8"x 6" or
Max. Size).
Press Menu/Set.
Press Stop/Exit.
Adjusting brightness
/ Press Menu/Set, 4, 3.
Press • to make a lighter print.
--OR--
Press • to make a darker print.
Press Menu/Set.
PhotoCapture 3.Brightness ]
Press Stop/Exit.
WALK-UP PHOTOCAPTURE CENTER
TM
(MFC-620CN ONLY) 10 - 9