if you want to reset this feature,..
Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
Press the ENTER button to select Plug & Play. For further details on setting
up options, refer to the pages 17~18.
The Plug & Play feature is only available in the TV.
Using the Channel
Press the OH _
or CH L_button
to change channels.
When you press the CH [_q or CH,L_J button,
the TV changes
YOU wilt see ait the channels
that the TV has memorizeo.
(The TV must have
You wilt not
that were either erased
or not memorized.
See page 21 to
Using the Number
Press the number buttons to go directty to a channel. For example, to setect
channel 27, press 2, then 7.
The TV will change channels when you press the second number.
_,_ ,For quick channel change, press the number buttons, then press the ENTER
You can press number buttons on Remote control for direc! channel,access,
press the same t,4umuer Button again to switch between
aigitai ana analog
TV channels broadcast by the same station.
= 1! I - I_
.... I/ //
|_ IV°I, I s0uRcE Cll i_ 11 !
Using the "-" Button
button is used to select stations that broadcast a digital signal.
For example, for Channel 7-1, press 7, then (_,
the TV is receiving
SD inuicates the TV is receiving a Staneara
,For quick channel change, press the number buttons, then press the ENTER
Using the PRE-CH Button
to select the Previous Channel
Use the number buttons to quickly tune to any channel.
Press the PRE-CH button. The TV wilt switch to the last channel viewed.
that are far apart,
tune to one
use me number
Then use the PRE-CH button to quickly alternate between them.