Download  Print this page

Viewingclosedcaptions(on-screentextmessages) - Analog - Samsung HL61A750A1FXZA Getting Started Manual

Series 7 750 dlp tv.
Hide thumbs

Advertisement

Table of Contents
Viewing Closed Captions (On-Screen Text Messages) =Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an
external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital
channels.)
1
Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
2
Press the A or _' button to select Caption,
then press the ENTER button.
3
Press the ENTER button to select Caption.
Press the A or _' button to select On, then press the ENTER button.
Press the ,tk or T button to select Caption Mode, then press the ENTER
button. Press the A or T button to select submenu (CC1~0C4 or Textl~Text4)
you want, then press the ENTER button.
Press the EXIT button to exit.
* The defauJl s Default.
, CCt: The Primary SynchronousCapr DnService. These are capuonsin the pnmar_
_anguagethat must be m syncwltn [ne soune, preferably ma[cneato a specificframe.
, CC2: The Special Non-SyncnronousUseCaptions.This channelcarries aata that tsintenaea
to augment nformation camed mthe program
, CC3: SecondarySynchronous Caption Service
Alternate Drogram-relareacautioneata, typically secona langbagecaptions.
, CC4: Spec alNon-Synchronoususe Capuons.Similar to CC2.
, Text1: First Text Service.This may be variousnon-program relateddata.
, Text2: SecondText Service.Additiona ea[a, usually nor program reia[ec.
. Text3/Text4: Third ant =ourthText Se_ cos. These datachannels shouldbe used or, if
Text1and Text2are not sufficient.
_,_ . The Caption feature doesn't work in COMPONENT, PC, HDMI(DVI)
modes.
. The availability
of captions depends on the program being broadcast.
You can also press the CC button on the remote controt to select Captions
On or Off.
r
I i
[_____IL
L___J

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: