Resetting The Picture Settings To The Factory Defaults - Samsung HL61A750A1FXZA Getting Started Manual

To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.
3D glasses (including the Emitter) not manufactured by Samsung, RealD, or ilixco may not be supported.
The 3D glasses and the Emitter must be manufacturer by the same company.
If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or
a headache.
Changing the Mode
Provides the function to turn on the 3D Effect. You can choose
between Model and Mode2. To achieve the 3D effect, the 3D glasses shutter back
and forth from the left to right and vice versa (left/right sync)..
1 Connect the TV, PC and 3D IR Emitter as shown in the figure.
2 Press the SOURCE button to select HDMI3/DVl.
3
4
Press the MENU button to display the menu.
Press the A or T button to select Picture, then press the ENTER button.
Press the A or T button to select Picture Options then press the ENTER
button.
Press the A or T button to select 3D Effect then press the ENTER button.
Presss the & or _' button to select Off, Model, or Mode2, then press the
ENTER button.
Press the EXIT button to exit.
* Off: Turns the 3D Effect function off.
; Model; Mode 1 operates with right Syrlc firstl
,, Mode2: Mode 2 operates with left Sync first,
If the 3D effect is not working properly, it means the Mode and 3D glasses may
not be syncing properly. To put them in sync, switch to the other mode.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the A or T button to select 3D Effect.
3 Press the ENTER button to start the 3D Effect.
Resetting the Picture Settings to the Factory Defaults
1 To select the desired picture mode, follow the Changing the Picture Standard
instructions numbers 1 and 2. (see page 24)
2 Press the A or _' button to select Picture Reset, then press the ENTER button.
Press the _ or m,-button to select OK or Cancel then press the ENTER button.
Press the EXIT button to exit.
;'_ Each mode can be reset.