Download  Print this page

To Select The Source; To Edit The Input Source Name - Samsung HL61A750A1FXZA Getting Started Manual

Series 7 750 dlp tv.
Hide thumbs

Advertisement

Table of Contents
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable Box/Satellite
receivers
(Set-Top
Box) connected
to the TV. Use to select the input source
of your choice.
1
Press the MENU button to display the menu.
Press the A or _' button to select input, then press the ENTER button.
Press the ENTER button to select Source
List.
Press the A or _' button to setect the signal source, then press the ENTER
button.
Available signal sources: TV, AV1, AV2, S-Video, Component1,
Component2,
PC, HDMI1, HDMI2, HDMI3/DVI,
USB.
;_
You can choose only those external devices that are connected
to the TV. In
the Source List, connected
inputs will be highlighted and sorted to the top.
Inputs that are not connected will be sorted to the bottom.
Using the Color buttons
on the remote with the Source
list.
Red (Refresh): Refreshes the Connecting external devices.
* TOOLS (Option): Displays the Edit Name and Information
menus.
You can also press the SOURCE button on the remote controt to view an external
signal source.
To Edit the input Source Name
i . .....
i...... U
You can name the device connected
to the input jacks to make your
input source selection
easier.
1
Press the MENU button to display the menu.
Press the A or T button to select Input, then press the ENTER button.
Press the A or _' button to select Edit Name, then press the ENTER button.
2
Press the A or _' button to setect AVl, AV2, S-Video, Component1,
Component2,
PC, BDMII,
BDMI2, or BDMI3/DVl
input jack, then press the
ENTER button.
Press the A or _' button to select VCR, DVD, Cable STB, Satellite
STB, PVR
STB, AV Receiver,
Game, Camcorder,
PC, TV, IPTV, Blu-Ray,
HD DVD or
Digital
Media Adapter
input source, then press the ENTER button.
Press the EXIT button to exit.
When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMI3/DVI
port, you should set the HDMI3/DVI
mode to PC in the Edit
Name of the Input mode.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: