Anynet + Menu
The Anynet + menu changes depending
on the type and status of the Anynet + devices connected
to the TV.
Anynet + Menu ......................
Switches from Anynet+ to TV broadcast mode.
Displays the Anynet+ device list.
Starts a recording. (This menu works only for a device supporting recording.)
Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder's title menu appears.
Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD
Allows reserving a recording. (This menu works only for a device supporting recording
Sound is output through the receiver (home theater).
You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using
TV Remote Control
in Anynet + Mode
when the menu ofthe
/ / /© buttons
corresponding device is displayed on the screen.
Anynet + Device
After switching to the device, while playing a file
After switching to the device, when you are watching
a TV program
When a Receiver is activated
Device with built-in Tuner
VOL r_q / _
The Anynet + function only works when the active source on the TV remote control is set to TV.
The REC button works only while in the recordabte state.
You cannot control Anynet + devices using the buttons on the side of the TV. You can control Anynet + devices only
using the TV remote control.
The TV remote control may not work under certain conditions.
In this case, resetect the Anynet + device.
The Anynet + functions do not operate with other manufacturers'
operations may differ depending on the device.
You can make a recording
of a TV program using a Samsung
Press the TOOLS button.
Press the A or _' button to select Recording Immediately
and press the ENTER button. Recording begins.
When there is more than one recording device
When multipl e recording devices are connected, the recording devices are listed.
Press the ,_.or _r button to select a recording device and press the ENTER button.
When the recording device is not displayed
Select Device List and press the red button to search devices.
Press the EXiT button to exit.
You can record the source streams by selecting
after pressing the TOOLS
Pressing the REC button will record whatever
you are currently watching.
video from another device, the video from the device is recorded.
;'_ Before recording, check whether the antenna jack is properly connected
to the recording device. To properly connect
an antenna to a recording device, refer to the recording device's users manual.