Download  Print this page

Using The 3d Function - Samsung HL61A750A1FXZA Getting Started Manual

Series 7 750 dlp tv.
Hide thumbs

Advertisement

Table of Contents
Setting the Color Gamut
You can choose your favorite color gamut. Color gamut means a color matrix made up
with the basic colors of Red, Green and Blue.
1
Fotlow the Activating
Picture Options
instructions
numbers 1 and 2.
(Refer to page 27)
2
Press the _, or T button to select Color Gamut, then press the ENTER button.
Press the A or T button to select Wide, Normal, or sRGB, then press the ENTER button.
Press the EXIT button to exit.
• _ Wide: Displays the natiye color gamut of panel device.
,, Normal: Normal Color Gamut offers flat and natural color tone.
Using the 3D Function
You can enjoy 3D movies and games on your TV. The 3D effects function enables you to view 3D images using special 3D
glasses.
3D Glasses
l(Not supplied)
3D IR Emitter
(Not supplied)
TV Side Panel
pc
"l
HDMI/DVI C able(Notsupplied)
_._The appearance
of the 3D glasses (including Emitter) may differ depending on the model of your glasses.
1
Connect a HDMI/DVI
cable between the HDMI3/DVI jack on the TV and the PC output jack on your computer.
2
Connect a 3.5ram Stereo/2RCA
cable between the DVI IN (HDMI3/DVI)
[RAUDIO-L]
jack on the TV and the Audio
Out jack of the sound card on your computer.
3
Connect the Emitter to the 3D SYNC OUT port on the rear panel of the TV.
4
Turn the TV on and set the source of the TV to HDMI3/DVI.
For more information
on the 3D glasses (including the Emitter), refer to the user manual of your 3D gtasses.
;_
Adjust
the PC resolution:
3D Effect Mode is only available in HDMI3/DVI
input signal(640x480@60Hz,
800x600@60Hz,
1024x768@60Hz,
1280x
720@60Hz,1280
x1024@60Hz,
1360x768@60Hz
or 1920x1080p@60Hz).
;_
The 3D IR Emitter communicates
with the 3D glasses.
Therefore, the 3D IR Emitter should be located near the 3D glasses.
It is activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported.
When the power is turned on or off, the mode changes to the default (Off) and the Format
is saved.
The 3D Effect is turned on or off regardless of the Picture
Mode.
;_
When 3D Effect is on, only the Contrast,
Brightness,
3D Effect,Position,
and Reset picture
menus are activated.
;_
To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.
Continued...

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: