Changing Channels - Samsung PLK405W - PLK - 405W Instruction Manual

Operation

Changing Channels

You can change channels on your TV using the CH
number buttons. You can use the number buttons to tune to any channel (even one that has been erased or
has not been memorized).
POWER
TV VCR CABLE SET
1 2 3
4 5 6
7 8 9
+100
DISPLAY
0
PIP CH.SCAN ASPECT
SWAP STILL MENU
VOL VOL
CH
TV/VIDEO ADD ERASE MUTE
P.STD S.STD MTS SURR.
REW PLAY FF
PRE-CH
SLEEP REC STOP PAUSE
P.SIZE LOCATE
PIP CH
28
Using the Channel Buttons
Press the CH
1
to change channels. The TV
changes each channel in order,
up or down, depending on which
button you press. You will see all
the channels that the TV has
memorized. (The TV must have
memorized at least three
channels.) You will not see
channels that were not memorized
or have been erased.
NUMBER
Using the Number Buttons
BUTTONS
To change to single-digit channels
1
(0–9) faster, press "0" before the
single digit.
Example: For channel 4, press "0," then "4."
To select a channel over 100,
press the +100 button first.
CH /
Example: For channel 122, press "+100," then
"2," then "2."
Using the Previous Channel
Press the PRE-CH button on the
1
remote control. The TV changes
to the last channel you were
watching.
PRE-CH
Scanning channels
You can automatically scan all of
1
the channels in memory at the
touch of just one button. Press the
CH.SCAN button on the remote
control. The TV will change the
channels automatically, one by
one. To stop channel scan,
press CH.SCAN button again.
and CH buttons, or by direct selection using the
or CH buttons