O SOURCE
Toggles between
allthe available
input sources
(TV, AVl, A V2, S-Video,
Component1,
Component2,
PC, H DMI1, HDMI2, HDMI3/DVl
orUSB).
O MENU
Press to see an on-screen menu of your TV's features.
0
+VOL-
Press to increase or decrease the volume.
In the on-screen menu, use the + VOL - buttons as
you would use the _ and m,-buttons on the remote
control.
ACHV
Press to change channels.
In the on-screen menu, use the A CH V buttons as
you would use the A and _' buttons on the remote
control.
_
(ENTER)
Press to confirm a selection.
Q
indicator
Lights
Blinks and turns off when the power is on and lights up
in stand-by mode.
O POWER
Press to turn the TV on and off.
Remote
Control
Sensor
Aim the remote control towards this spot on the TV.
>_ •
When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the
A/_'/_/I_
buttons on the remote control.
•
If the remote control no longer works or you have lost iL you can use controls on the panel of the TV.
indicator
Light Key
(O
:On, _
: Blinking, _
:Off)
STAND
BY/TEMP
TIMER
LED
Indication
•
(_
(i__
Standbystate.
O
O
(11
The picturewill automatically appearinabout15 seconds
O
O
@
AutoTimer ON/OFF has beensetand the setwill automatically b e turnedon in about15 seconds
,_
(1t
O
A coolingfan insidethe set is not operatingnormally
_Jl
_lt
L_
LEDmay be defective.Pleasecontacta certifiedtechnician.
>_ •
It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
•
The TV has a fan to keep the inside LED from overheating. You'll occasionally hear it working.