Adding And Erasing Channels (Manual Method); Changing Channels; Using The Channel Buttons; Directly Accessing Channels - Samsung 492S Owner's Instructions Manual

O
P E R AT I O N

Adding and Erasing Channels (Manual Method)

1
Use the number buttons to directly select the channel that
will be added or erased.
2
Press ADD/ERASE:
Repeatedly pressing this button will alternate between
"Channel added" and "Channel erased."
Press MENU to exit.
You can view any channel (including an erased channel) by using the number
buttons on the remote control.

Changing Channels

Using the Channel Buttons

1
Press the CH
channels.
When you press CH
see all the channels that the TV has memorized. (The TV must have memorized
at least three channels.) You will not see channels that were either erased or not
memorized.

Directly Accessing Channels

Use the number buttons to quickly tune to any channel.
1
Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2," then "7."
The TV will change channels when you press the second
number.
When you use the number buttons, you can directly select channels that were
either erased or not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press
"+100," then "2," then "2.")
To change to single-digit channels (0–9) faster, press "0" before the
single digit. (For channel "4," press "0," then "4.")
3.7
C T : TV O
HAPTER HREE PERATION
or CH button to change
or CH , the TV changes channels in sequence. You will