Scanning With Intellistand - Motorola Symbol LS4208 Product Reference Manual

2 - 10 Symbol LS4208 Product Reference Guide

Scanning with Intellistand

When the scanner is placed in the Intellistand, the scan pattern selected in hand-held triggered mode continues
(see Scan Pattern on page 4-6).
To operate the scanner in Intellistand:
Ensure the scanner is properly connected to the host (see the appropriate host chapter for information on host
1.
connections).
Insert the scanner in Intellistand by placing the front of the scanner into the stand's "cup."
2.
Cup
Scanner Holder
Inserting the Scanner in the Intellistand
Figure 2-13
Use the Intellistand's adjustment knobs to adjust the height and angle of the scanner.
3.
Present the bar code.
4.
When the bar code is in view, the scanner emits a full scan line. After 3 minutes, the
NOTE
scanner automatically switches to a reduced scan line. After 1 hour, the scanner automatically
switches to blink mode.
Upon successful decode, the scanner beeps and the LED turns green. For more information about beeper and
5.
LED definitions, see
Angle Adjustment Knob
Height Adjustment Knob
Table 2-1 and Table 2-2.