2 - 6
DS4208 Digital Scanner Product Reference Guide
Scanning with Intellistand
When the digital scanner is placed in Intellistand it operates in continuous (constant-on) mode, where it
automatically decodes a bar code presented in its field of view.
To operate the scanner in Intellistand:
Ensure the scanner is properly connected to the host (see the appropriate host chapter for information on host
1.
connections).
Insert the scanner in Intellistand by placing the front of the scanner into the stand's "cup."
2.
Cup
Scanner Holder
Figure 2-3
Inserting the Scanner in the Intellistand
Use the Intellistand's adjustment knobs to adjust the height and angle of the scanner.
3.
Present the bar code.
4.
Upon successful decode, the scanner beeps and the LED turns green. For more information about beeper and
5.
LED definitions, see
Angle Adjustment Knob
Height Adjustment Knob
Table 2-1
and
Table
2-2.