Optional Ibm Parameters; Ignore Beep; Ignore Bar Code Configuration - Motorola Symbol LS4208 Product Reference Manual

8 - 6 Symbol LS4208 Product Reference Guide

Optional IBM Parameters

If you configure the scanner and find the settings were not saved, or changed, when the system is restarted scan
the bar codes that follow to override IBM interface defaults.
Scan a bar code below after setting defaults and before configuring the scanner.

Ignore Beep

The host can send a beep request to the scanner. When this parameter is enabled, the request is not sent to the
attached scanner. All directives are still acknowledged to the IBM RS485 host as if it were processed.

Ignore Bar Code Configuration

The host has the ability to enable/disable code types. When this parameter is enabled, the request is not sent to
the attached scanner. All directives are still acknowledged to the IBM RS485 host as if it were processed.
*
Disable
*
Disable
Enable
Enable