Led Definitions - Motorola Symbol LS4208 Product Reference Manual

Beeper Definitions (Continued)
Table 2-1
Beeper Sequence
Host Specific
USB only
4 short high beeps
Scanner gives a power-up beep after
scanning a USB Device Type.
This power-up beep occurs more than once. The USB bus may put the scanner in a state where power to
RS-232 only
1 short high beep

LED Definitions

In addition to beeper sequences, the scanner communicates with the user using a two-color LED display.
defines LED colors that display during scanning.
Standard LED Definitions
Table 2-2
LED
Off
Green
Red
Scanner has not completed initialization. Wait several
seconds and scan again.
Communication with the bus must be established before the
scanner can operate at the highest power level.
the scanner is cycled on and off more than once. This is
normal and usually happens when the host cold boots.
A <BEL> character is received and Beep on <BEL> is
enabled.
No power is applied to the scanner, or the scanner is on and ready to scan.
A bar code was successfully decoded.
A data transmission error or scanner malfunction occurred.
Indication
Indication
Scanning 2 - 3
Table 2-2