Chapter 6 Rs-232 Interface; Introduction - Motorola Symbol LS4208 Product Reference Manual

Chapter 6 RS-232 Interface

Introduction

This chapter describes how to set up the scanner with an RS-232 host. The RS-232 interface is used to connect
the scanner to point-of-sale devices, host computers, or other devices with an available RS-232 port (e.g., com
port).
If the host is not listed in
to match the host.
The scanner uses TTL RS-232 signal levels, which interface with most system architectures.
NOTE
For system architectures requiring RS-232C signal levels, Symbol offers different cables providing
TTL-to-RS-232C conversion. Contact Motorola Enterprise Mobility Support for more information.
Throughout the programming bar code menus, default values are indicated with asterisks (
Table 6-2, refer to the documentation for the host device to set communication parameters
*Baud Rate 57,600
*
Indicates Default
*
).
Feature/Option