Special Commands; Pause Duration; Begin New Rule; Save Rule - Motorola Symbol LS4208 Product Reference Manual

14 - 6 Symbol LS4208 Product Reference Guide

Special Commands

Pause Duration

This parameter along with the Send Pause parameter on
transmission. Pauses are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second
intervals. For example, scanning bar codes "0" and "1" inserts a 0.1 second pause; "0" and "5" gives a 0.5 second
delay. Numeric bar codes begin on
the selection, scan Cancel on page D-3.

Begin New Rule

Scan this bar code to start entering a new rule

Save Rule

Scan this bar code to save the entered rule.
page 14-24
page D-1 in Appendix D, Numeric Bar
Pause Duration
Begin New Rule
Save Rule
allows a pause to be inserted in the data
Codes. In case of an error, or to change