Connecting A Keyboard Wedge Interface - Motorola Symbol LS4208 Product Reference Manual

5 - 2 Symbol LS4208 Product Reference Guide

Connecting a Keyboard Wedge Interface

Keyboard Connector
Keyboard Wedge Connection with Y-cable
Figure 5-1
To connect the Keyboard Wedge interface Y-cable:
Interface cables vary depending on configuration. The connectors illustrated in
NOTE
are examples only. The connectors may be different than those illustrated, but the steps to
connect the scanner remain the same.
Turn off the host and unplug the keyboard connector.
1.
Attach the modular connector of the Y-cable to the cable interface port on the scanner. (See Installing the
2.
Interface Cable on page 1-3.)
Connect the round male DIN host connector of the Y-cable to the keyboard port on the host device.
3.
Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.
4.
If needed, attach the optional power supply to the connector in the middle of the Y-cable.
5.
Ensure that all connections are secure.
6.
Turn on the host system.
7.
Select the Keyboard Wedge host type by scanning the appropriate bar code from Keyboard Wedge Host
8.
Parameters on page 5-4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
9.
Male DIN Connector
Female DIN Connector
Figure 5-1