GE JB910 Owner's Manual page 34

Careand cleaning of the range.
Wire cover bolde_
Oven Light Replacement
CAUTION: B eforereplacing yourovenlightbulb,
disconnect the electrica/ power to the range at the
main fuse or circuit breaker paneL
Be sure to let the light cover and bulb
cool completely.
To remove the cover:
[]
Hold a hand under the cover so it
doesn't tidl when released. _ith
finge_ of the same hand fimfl_
push back the wire coxer holden
I,ifl off the coxen
Do not remove any screws to remove
the cover
[] Replace bt:db with a 40-watt
appliance
bulb,
Toreplace the cover."
[] Place it into groove of the light
receptacle. Pull wire torward to the
center of the cover tmfil it snaps
into place.
[] Connect electrical power to the
range,
Do not store a soiled broiler pan and
grid anywhere in the range.
Broiler Pan and Grid
Do not clean the broiler pan or grkt la a se/f-
cleanlag oven,
_Mfer broiling, remo\v the br_dler pan
fl'om the oven. Remove the grid fl'om
the pan. Careflflly pour out the grease
fi'om the pan into a proper containel;
Wash and nbse the broiler pan and grid la hot
water with a
soap-filled or plastlescounbg pad
If/bed has burned
on, spl_nkle
the grid
with detergent while hot and cover with
wet paper towels or a dishcloth. Soaking
the pan will remo\ e burned-on foods.
Both the broiler pan and gnd may be cleaned with
a commemla/oven cleaner
Both the broiler pan and grid can also be
cleaned in a dish_ashen
Wipe up beavy soil on the oven
bottom.
Oven Heating Elements
Do not clean the broil element. Any soil
will bm'n off when the element is heated.
(:lean the oxen floor with wam_ soap_
wateE
Onsome models,thebakeelementisnot
exposed andb undertheovenfloor If spillovers,
residue or ashaccumulate ontheovenfloor,
wipeup beforeself-cleaning
34