GE JKP18 Owner's Manual page 8

Special features of your oven control
Tonesat the End of a Timed Cycle
At theendof a tYned cycle, 3 shortbeepswill
soundfollowed byonebeepevery6 seconds until
theCLEAR/OFF padis pressedThis continuous 6
second beepmaybe cance/ecL
To cancel tile 6 second beep:
[]
Press tlle BAKEand BROIL HI/LO
pads (on double oven models use
the upperoven controls) at the s_mle
time for 3 se(onds until the display
shows SF.
[]
Press the KITCHEN TIMERON/OFF
pad. The display shows CON BEEP
(continuous beep). Press the
KITCHENTIMERON/OFF pad
again. Tile display shows BEEP.
(This cancels the one beep exvx T
6 seconds.)
[] Pressthe STARTpad.
NOTE: Ondouble ovenmodels this cancels the
endof cycle tone for both ovens.
Fahrenheit or Celsius Temperature Selection
Yourovencontrol is set to use the Fahrenheit
temperatureselections but youmay change this
to use the Celsiusselections.
[] Press tile BAKEand BROIL HI/LO
pads (on double oven models use
tile upperoven controls) at the same
time tbr 3 seconds until tile display
shows SF.
[] Press tile BROILHI/LOpad. Tile
display will show F (Fahrenheit).
[] Press the BROILHI/LOpad again. The
display will show C ((eMus).
[] Press the STARTpad.
NOTE" Ondoubleovenmodels thenewsettlbg
will be displayed forbothovens.
Cook and Hold
Your newcontrolhasa cookandholdfeaturethat
keeps cooked foodswarmfor up to3 hoursafter
thecooklbg functionis hblshed.
To activate dris feature, follow tl,e steps
below.
()n double o_en models both o_ens
follow die same step 1. Then proceed
xdth steps 2 through 3, using tile pads for
the upper or lower oven.
[]
Press the BAKEand BROIL HI/LO
pads (on double oven models use
d*e upperoven c()nt1ols) at d_e same
dine fi)r 3 seconds undl tl,e display
shows SE
[]
Press the COOKING TIMEpad. The
(fisplay will show HidOFF.
[]
Press d_e COOKING TIME pad again u)
actixate tl_e tbamre. The display will
show Hid ON.
Press tl,e START pad u) activate dm
cook and hold tb'amre and leme d_e
control set in Iris special features
Illode.
8
Using Convection Conversion
By using the ConvectionConversionfeature you
can automatically convert the oven temperature
from regular baklbg to ConvectionBake
temperetures.
To convert tile oven temperature fi)r
convection baking, folh)w tile steps beh)w.
[] Press and hoM tile CONVECTION
BAKE pad for 4 to 5 se(onds.
CONConBakewill show in the display.
[] Using tile number pads, enter
tile temperature recommended
in the recipe.
[] Press the START pad.
Tile display shows tile converted
(reduced) temperature. For
exmnple, if you entered a redpe
temperature of 350 °F., the display
will sh{)w a25°F when it is converted.
[] Press the CLEAR/OFF pad when
baking is finished.
NOTE" Conversion mustbe set eachflYne you
wantto usei_ It isnot heldin memon/