Troubleshooting Tips - GE JKP18 Owner's Manual

Before YouCall ForService...
Troubleshooting tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Controlsignals after
entering cookingtime
or de!aystart
Possible Causes
You forgot to enter a bake
temperature or cleaning
time.
What To Do
• Press tile BAKE pad and desired temperature t)r tile
SELF CLEAN pad and desired (lean time.
Fooddoes notbake Oven controls improperly set. • See the Using the oven section.
or mast properly
Shelf position is incorrect
• See tile Using the oven section.
or the shelf is not level.
Incorrect cookware or * See tile Using the oven section.
cookware of improper size
being used.
Oven floor not in place. * Replace tile oven floor.
Oven thermostat needs
* See tile Adjust the oven thermostat--Do it yourself!
adjustment, section.
Fooddoes not Door not open to the * See tile Using the oven section.
bmilproperly broil stop position as
recommended.
Oven controls improperly set. * Make sure you press tile BROIL HI/LO pad.
Improper shelf position * See tile Broiling Guide
beingused.
Food being cooked * Use tile broiling pan and grid that came xdth your oven.
in a hot pan. Make sure it is cool.
Cookware not suited * Use/he broiling pan and grid/ha/(:lille xd/ll your OVell.
for broiling.
The probe is plugged into the • Unplug and remove the probe flora the oven.
oudet in the oven.
Aluminum foil used on the * See tile Using the oven section.
broiling pan and ,grid has
not been fitted properly and
slit as recommended.
In some areas the power * Preheat tile broil element fit( 10 minutes.
(voltage) may be low.
• Broil for tile hmgest period of time recommended in
tile Broifing Guide.
Clock and timer A fuse in your home maybe * Replace tile filse or reset tile circuit breaker.
do not work blown or the circuit breaker
tripped.
Oven controls improperly set. • See the Using the clock and timer section.
Oven light does Light bulb is loose or defective. * Tighten or replace tile bull).
not work
Pad operating light is broken. * Call for service.
3O