Gigabit Ethernet Specifications; Mgbic-Lc01/Mgbic-Mt01 Specifications (1000Base-Sx; Mgbic-Lc03 Specifications (1000Base-Sx; Mgbic-Lc01 / Mgbic-Mt01 Optical Specifications - Enterasys 2S4082-25-SYS Hardware Installation Manual

NAC Controller PEP 7S4280-19 Specifications

Gigabit Ethernet Specifications

The following specifications for the Mini‐GBICs (shown in Table A‐12 through Table
exceed the IEEE 802.3z‐1998 standard.

MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)

Table A-12 MGBIC-LC01 / MGBIC-MT01 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Link Power Budget
Table A-13 MGBIC-LC01 / MGBIC-MT01 Operating Range
Item
62.5 µm MMF
62.5 µm MMF
50 µm MMF
50 µm MMF

MGBIC-LC03 Specifications (1000BASE-SX)

Table A-14 MGBIC-LC03 Optical Specifications
Item
Transmit Power (minimum)
Transmit Power (maximum)
Receive Sensitivity
Link Power Budget
1. The maximum drive distance (up to 2 km) depends on the quality of the installed multimode fiber-optic cable
segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment. The
Link Power Budget must not exceed those specified in this table. The MGBIC-LC03 input power must not
exceed -3 dBm. Otherwise, saturation could occur.
Table A-15 MGBIC-LC03 Operating Range
Item
62.5 µm MMF
50 µm MMF
A-8 Specifications and Regulatory Compliance
62.5 µm MMF
-9.5 dBm
-17 dBm
7.5 dBm
Modal Bandwidth @ 850 nm
160 MHz/km
200 MHz/km
400 MHz/km
500 MHz/km
62.5/125 µm MMF
-9.5 dBm
-3 dBm
-20 dBm
1
(Multimode Only) 10.5 dBm
Modal Bandwidth @ 1310 nm
160 MHz/km
400 MHz/km
A‐20) meet or
50 µm MMF
-9.5 dBm
-17 dBm
7.5 dBm
Range
2-220 Meters
2-275 Meters
2-500 Meters
2-550 Meters
50/125 µm MMF
-9.5 dBm
-3 dBm
-20 dBm
10.5 dBm
Range
2,000 Meters
2,000 Meters