Set The System Date; Set The System Time - Enterasys 2S4082-25-SYS Hardware Installation Manual

Figure 6-17

Set the System Date

12. A screen displays for setting the system time in an hour/minute/second format as displayed in
Figure 6‐18. Click on the desired box to make any changes and click on OK to proceed.
Figure 6-18

Set the System Time

13. A screen displays for setting whether the hardware clock is set to the Coordinated Universal
Time (UTC/GMT) or to local time as displayed in Figure
setting. Click on OK to proceed.
The NAC Controller Initialization Procedure
6‐19. Select your hardware clock
Enterasys NAC Controller Hardware Installation Guide 6-13