Out-Of-Band Management Type Configuration Setup Confirmation; Configure System Date And Time - Enterasys 2S4082-25-SYS Hardware Installation Manual

The NAC Controller Initialization Procedure
Figure 6-15
10. A screen displays the current configured date and time and asks you whether you would like
to update the date and time as displayed in Figure
two steps and proceed to Step
you select Yes, proceed to Step
Figure 6-16
11. A screen displays for setting the system date as displayed in Figure
a previous month or V(+) to select the next month. When the correct date is selected, click on
OK to proceed.
6-12 Initializing the NAC Controller

Out-Of-Band Management Type Configuration Setup Confirmation

14 to configure the UTC/Local Time Hardware Clock setting. If
11.

Configure System Date and Time

6‐16. If you select No, skip the following
6‐17. Click on ^(‐) to select