Table A-9 Specifications (continued)
Item
Environmental
Operating Temperature
Storage Temperature
Operating Relative Humidity
Mini-GBIC Input/Output Specifications
The Mini‐Gigabit Ethernet Card (Mini‐GBIC) port interface slots can accept 1000BASE‐SX short
wavelength or 1000BASE‐LX long wavelength fiber‐optic Mini‐GBICs (see Table
optional Mini‐GBICs are hot swappable.
Table A-10 Mini-GBIC Input/Output Port Specifications
Item
MGBIC-LC01
MGBIC-LC03
MGBIC-LC09
MGBIC-MT01
MGBIC-08
MGBIC-02
7S4280-19 COM Port Pinout Assignments
The COM port is a serial communications port for local access to Local Management. Refer to
Table
A‐11 for the COM port pin assignments.
Table A-11 COM Port Pin Assignments
Pin
Signal Name
1
Transmit Data (XMT)
2
Clear to Send (CTS)
3
Data Set Ready (DSR)
4
Receive Data (RCV)
5
Signal Ground (GND)
6
Request to Send (RTS)
7
Data Terminal Ready (DTR)
8
Data Carrier Detect (DCD)
Specification
5°C to 40°C (41°F to 104°F)
-30°C to 73°C (-22°F to 164°F)
5% to 90% (non-condensing)
Specification
Provides one LC fiber-optic multimode port that is compliant with the
1000BASE-SX standard LC connector.
Provides one LC fiber-optic multimode port that is compliant with the
1000BASE-SX standard LC duplex style connector.
Provides one LC fiber-optic single-mode port that is compliant with
the 1000BASE-LX standard LC connector.
Provides one MT-RJ fiber-optic multimode port that is compliant with
the 1000BASE-SX standard MT-RJ connector.
Provides one LC fiber-optic single-mode port that is compliant with
the 1000BASE-ELX standard LC connector.
Provides one RJ45 copper connection that is compliant with the
1000BASE-T standard RJ45 connector.
Input/Output
Output
Input
Input
Input
NA
Output
Output
Input
Enterasys NAC Controller Hardware Installation Guide A-7
NAC Controller PEP 7S4280-19 Specifications
A‐10). The