Nac Controller Engine Com Port Pinout Assignments; Com Port Pin Assignments - Enterasys 2S4082-25-SYS Hardware Installation Manual

7C111 Chassis Specifications and Regulatory Compliance
Table A-5 NAC Controller Engine Specifications (continued)
Item
DC Output Voltage
DC Output Amps
Physical
Dimensions
Predicted hours for Mean Time
Between Failures (MTBF)
Maximum Wattage
Environmental
Operating Temperature
Storage Temperature
Operating Relative Humidity
Minimum Air Flow

NAC Controller Engine COM Port Pinout Assignments

The COM port is a serial communications port for local access to Local Management. Refer to
Table A‐6 for the COM port pin assignments.
Table A-6 COM Port Pin Assignments
Pin
1
2
3
4
5
6
7
8
A-4 Specifications and Regulatory Compliance
Signal Name
Transmit Data (XMT)
Clear to Send (CTS)
Data Set Ready (DSR)
Receive Data (RCV)
Signal Ground (GND)
Request to Send (RTS)
Data Terminal Ready (DTR)
Data Carrier Detect (DCD)
Specification
12v
5A
• Width: 10.65 in. (27.05 cm)
• Length: 7.3 in. (18.54 cm)
• Depth: 1.8 in (4.57 cm)
For the MTBF hours for this module, refer to the MTBF web
site at URL
http://www.enterasys.com/support/mtbf/
50 Watts
0°C to 40°C (32°F to 104°F)
-30°C to 73°C (-22°F to 164°F)
5% to 90% (non-condensing)
200 Linear Feet / Minute
Input/Output
Output
Input
Input
Input
NA
Output
Output
Input