Appendix A: Specifications And Regulatory Compliance; 7C111 Chassis Specifications And Regulatory Compliance; Physical Specifications; 7C111 Chassis - Enterasys 2S4082-25-SYS Hardware Installation Manual

Specifications and Regulatory Compliance
This appendix provides operating specifications for the NAC Controller. Enterasys Networks
reserves the right to change the specifications at any time without notice.
For information about...

7C111 Chassis Specifications and Regulatory Compliance

NAC Controller Engine Interface Specifications
NAC Controller PEP 2S4082-25 Module Specifications
NAC Controller PEP 7S4280-19 Specifications
7C111 Chassis Specifications and Regulatory Compliance

Physical Specifications

The physical specifications for the module 7C111 chassis, power supply modules, and the fans are
as follows:

7C111 Chassis

Table A-1 Chassis Specifications
Item
Physical
Dimensions:
Weight:
Chassis empty:
Chassis with NAC Controller PEP:
Mean Time Between Failures (MTBF)
Specification
8.81 H x 44.46 W x 51.92 D (cm)
3.47 H x 17.62 W x 20.44 D (in.)
6.36 kg (14 lb)
12.72 kg (28 lb)
118,975 hours
Enterasys NAC Controller Hardware Installation Guide A-1
A
Refer to page...
A-1
A-3
A-5
A-6