Manual Reception (Telephone Only Mode); Manual Reception - Konica Minolta bizhub C550 User Manual

Reception
3.3

Manual reception (Telephone only mode)

This mode should be set when an external telephone is connected and many
telephone calls are received.
This mode operates when the [Receive Mode] is set to [Manual RX] in the
[Line Parameter Setting] of the Utility mode.
Refer to "Specifying transmission/ receiving mode (Line Parameter Settings)"
on page 10-57 regarding reception mode settings.
Incoming
The following procedure describes operations for manual reception.

Manual reception

1
When the external telephone line rings, touch [Off-Hook] on the Fax/
Scan screen.
2
Confirm that [RX] has been selected.
3
Touch the [Execute] button on the Off-Hook screen.
– When [Start] key is pressed, reception starts after touching [Yes]
and then touching [OK] on the "Off-Hook start" confirmation
screen.
!
Detail
When an original is loaded in the ADF or original glass, [RX] is not high-
lighted even if a fax is received.
In this case, touch [RX] to highlight the button.
Note
If "Confirm Address (TX)" in Utility mode is set to "ON", [Off-Hook] does
not appear.
C550
The external phone continues ringing
Pick up the receiver and talk
3
3-4