11.17 Broadcast Report - Konica Minolta bizhub C550 User Manual

Reports and Lists

11.17 Broadcast Report

Broadcast Report is printed automatically when sequential broadcast trans-
mission is completed.
ON/OFF can be set in [Sequential TX Report] of the Utility mode. Report out-
put timing (all destination batches/each destination) can be specified in
[Broadcast Result Report].
Destination: Any of the following is described.
- Destination name for recipients' whose destination name is registered in
Address Book.
- Recipient's telephone number
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints:
Describes the number of sheets sent. The sent pages and the total number
of pages are described in fractional format.
Result:
OK:
S-OK:
PW-OFF:
TEL:
NG:
Cont:
C550
Described when communication is terminated normally.
Described when communication has stopped.
Described when operation power switch was turned OFF during
communication.
Described when there is telephone call.
Described when there is communication error.
Described when there is a transmission error and that there is tran-
sition to resend wait mode (Error page redial).
11
11-37