Sending The Fax After Specifying Long Original Setting - Konica Minolta bizhub C550 User Manual

Useful transmission functions

Sending the fax after specifying Long Original setting

1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to "Loading the original" on
page 2-7.
3
Touch [Original Settings].
4
Touch [Long Original].
– Touch [Long Original] again to cancel the settings.
5
Touch [OK].
Returns to Fax/Scan screen.
6
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning condi-
tions" on page 2-12 or "Scan Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on
page 6-4.
– For details on Communication Settings, refer to "Communication
Settings" on page 6-5.
7
Specify the destination.
– For details on destination, refer to "Specifying only one destination"
on page 2-17 and "Specifying multiple destinations (Sequential
broadcast transmission or broadcast transmission)" on page 2-30.
C550
6
6-40