To send a fax
4
Load the original on the
original glass, and touch
[Scan Settings], [Sepa-
rate Scan], [OK] and then
press [Start] key.
5
Load the original sequentially on the original glass and press [Start]
key.
–
Touching [Change Setting] enables you to alter 1-Sided/2-Sided
settings and Frame Erase settings.
–
Repeat this operation until you have scanned the entire original you
wish to send.
The scanned original is stored in the memory.
6
Touch [Finish].
7
Press [Start] key.
Transmission begins.
C550
2
2-9