Polling Tx Report - Konica Minolta bizhub C550 User Manual

Reports and Lists
11.4

Polling TX Report

Polling TX Report is printed automatically.
ON / If TX Fails / OFF can be set for [TX Result Report] in the Utility mode.
Destination: Recipient's machine ID is described.
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints
Describes the number of sheets sent. In case of memory transmission, the
sent pages and the total number of pages are described in fractional format.
Result:
OK:
S-OK:
PW-OFF:
TEL:
NG:
Cont:
No Ans:
Busy:
M-Full:
C550
Described when communication is terminated normally.
Described when communication has stopped.
Described when operation power switch was turned OFF during
communication.
Described when there is telephone call.
Described when there is communication error.
Described when there is a transmission error and that there is tran-
sition to resend wait mode (Error page redial).
Described when there is no response from the recipient.
Described when communication is not possible as the recipient's
line is busy.
Described when it is not possible to receive a fax when the fax file
memory becomes full during reception.
11
11-12