Display Prompts; Table 3-3. Security Access Prompts And Responses; Table 3-4. Alarm Settings Prompts And Responses; Table 3-5. Calibration Prompts And Responses - Emerson 7003M Operator's Manual

Operator Manual
748223-K
June 2002
b.

Display Prompts

The Model 7003M prompts the operator
for inputs and also indicates the function
CODE
id
no
YES
CODE
A-1
A-2
C-1
C-2
On
OFF
dis
CODE
CAL
PPr
CPr
GAS
CODE
Set
4-0
CLo
CHi
3-4 Operation
enter security code prompt
invalid security code entered - access denied
access granted or security code entered is correct
Table 3-3. Security Access Prompts and Responses
setpoints for Alarm 1 - ALARM function
setpoints for Alarm 2 - ALARM function
setpoints for Alarm 1 - ON/OFF - Controller function
setpoints for Alarm 2 - ON/OFF - Controller function
value in which to initiate an Alarm Action (On-setpoint)
value in which to terminate an Alarm Action (Off-setpoint)
Alarm is now disabled
Table 3-4. Alarm Settings Prompts and Responses
initiate a span calibration
enter process pressure value
enter calibration pressure value
Initiate a zero offset calibration (gas)
Table 3-5. Calibration Prompts and Responses
enter system setup mode
define the current output as 4-20 or 0-20 mA
% concentration that 0/4 mA represents (calibration low)
% concentration that 20 mA represents (calibration high)
Table 3-6. System Setup Prompts and Responses
in progress. For example, when entering
the calibration mode, the prompt "CAL" is
displayed for one second after the CAL
key is pressed. Display acronyms are
listed in Table 3-3 through Table 3-9.
DEFINITION
DEFINITION
DEFINITION
DEFINITION
Rosemount Analytical Inc. A Division of Emerson Process Management
Model 7003M