8. Replace heat exchanger and lock into
place (turn both lock washers outwards
until they snap into place).
9. Close door in plinth.
The appliance will not operate if the
HEAT EXCHANGER indicator is still lit.
Caution! Never operate the dryer
without the heat exchanger.
Cleaning the drum
Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside
of the drum. The degree to which the
What to do if ...
Troubleshooting by yourself
If, during operation, the error code E... plus
number or letter) appears on the multi-dis-
play: Switch the appliance off and on again.
Dryer does not work.
Drying results unsatisfac-
When a button is pressed
- no reaction of the ma-
Drum light does not work.
Mains plug is not plugged in or fuse
is not working correctly.
Loading door is open.
Have you pressed the START/
PAUZE (START/PAUSE) button?
Wrong programme selected.
Lint filters clogged.
Fluff filter clogged.
Heat exchanger clogged with lint.
Overloading of laundry.
Ventilation slots in base area cov-
Residue on inside surface of drum
or drum ribs.
Conductance of water at installa-
tion site differs from standard set-
ting of machine.
Drying protection. After the start of
the programme, the option can no
longer be set.
Programme selector in O off posi-
laundry has been dried is then no longer
detected reliably. The laundry is damper
than expected when removed from the
Use a standard domestic cleaner (e.g. vine-
gar-based cleaner) to wipe down the inside
of the drum and drum ribs.
Clean control panel and housing
Caution! Do not use furniture cleaners
or aggressive cleaning agents to clean
Use a damp cloth to wipe down the control
panel and housing.
Reset programme. Press the START/PAUZE
(START/PAUSE) button. If the error appears
again, please contact the Customer Care
Department, stating the error code
Plug in at mains socket. Check fuse
in fuse box (domestic installation).
Close loading door.
Press the START/PAUZE (START/
PAUSE) button again.
Select a different programme the
next time you dry (see "Programme
Clean lint filters.
Clean fluff filter.
Clean heat exchanger.
Observe recommended loading
Uncover ventilation slots in base
Clean inside surface of drum and
Re-programme standard setting for
degree of drying (see 'Program-
ming options' chapter).
Turn the programme knob to O
off . Set the programme again.
Turn programme selector to any