Understanding the printer menus
Flash Drive menu
Use
Copies
1–999
Paper Source
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Color
Color
Black Only
Collate
1,1,1–2,2,2
1,2,3–1,2,3
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
To
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Generate color or black‑and‑white outputs.
Notes:
•
Color is the factory default setting.
•
This setting can generate color output only from a flash drive print job.
Stack the pages of a print job in sequence when printing multiple copies.
Note: 1,2,3–1,2,3 is the factory default setting.
Specify whether prints are on one side or on both sides of the paper.
Note: "1 sided" is the factory default setting.
Define binding for duplexed pages in relation to paper orientation.
Notes:
•
Long Edge is the factory default setting. Long Edge assumes binding along the
long edge of the page (left edge for portrait and top edge for landscape).
•
Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Specify the orientation of a multiple‑page document.
Notes:
•
Auto is the factory default setting. The printer chooses between portrait and
landscape.
•
This setting affects jobs only when Paper Saver is set to any value other than
Off.
Print multiple‑page images on one side of the paper.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
92