Lexmark CS410 Series User Manual page 97

Understanding the printer menus
Use
Color Balance
Cyan
‑5 to 5
Magenta
‑5 to 5
Yellow
‑5 to 5
Black
‑5 to 5
Reset Defaults
Color Samples
sRGB Display
sRGB Vivid
Display—True Black
Vivid
Off—RGB
US CMYK
Euro CMYK
Vivid CMYK
Off—CMYK
Manual Color
RGB Image
RGB Text
RGB Graphics
To
Adjust color in printed output by increasing or decreasing the amount of toner being
used for each color.
Note: 0 is the factory default setting.
Print sample pages for each of the RGB and CMYK color conversion tables used in the
printer.
Notes:
•
Selecting any setting prints the sample.
•
Color samples consist of a series of colored boxes along with the RGB or CMYK
combination that creates the color observed. These pages can be used to help
decide which combinations to use to get the printed output you want.
• To access a complete list of color sample pages using the Embedded Web Server,
type the network printer IP address in the Web browser address field.
Customize the RGB color conversions.
Select from the following options:
Vivid
sRGB Display
Display—True Black
sRGB Vivid
Off
Notes:
• sRGB Display is the factory default setting for RGB Image. This applies a color
conversion table to an output that matches the colors displayed on a computer
monitor.
•
sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. This
applies a color table that increases saturation. This is preferred for business
graphics and text.
•
Vivid applies a color conversion table that produces brighter, more saturated
colors.
•
"Display—True Black" applies a color conversion table that uses only black toner
for neutral gray colors.
•
Off turns off color conversion.
97