Replace Missing Waste Toner Bottle [82.Xy]; Replace Unsupported [Color] Cartridge [32.Xy]; Replace Unsupported [Type] Imaging Kit [32.Xy]; Replace Waste Toner Bottle [82.Xy] - Lexmark CS410 Series User Manual

Troubleshooting

Replace missing waste toner bottle [82.xy]

Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet that came
with the supply.

Replace unsupported [color] cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.

Replace unsupported [type] imaging kit [32.xy]

Note: The type can be a black imaging kit, or a black and color imaging kit.
Remove the indicated imaging kit, and then install a supported one to clear the message.
Note: If you do not have a replacement imaging kit, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.

Replace waste toner bottle [82.xy]

Replace the waste toner bottle to clear the message.

Restore held jobs?

Try one or more of the following:
•
From the printer control panel, touch Restore to restore all held jobs stored in the printer hard disk.
•
From the printer control panel, touch Do not restore if you do not want to restore any of the print jobs.

SMTP server not set up. Contact system administrator.

From the printer control panel, touch Continue to clear the message.
Note: If the message appears again, then contact your system support person.

Some held jobs were not restored

From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models, press
to confirm.
Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.
164