Incorrect Paper Size, Open [Paper Source] [34]; Insert Tray [X]; Insufficient Memory For Flash Memory Defragment Operation [37]; Insufficient Memory, Some Held Jobs Were Deleted [37] - Lexmark CS410 Series User Manual

Troubleshooting

Incorrect paper size, open [paper source] [34]

Try one or more of the following:
•
Load the correct size of paper in the tray.
•
From the printer control panel, select Continue to clear the message and print using a different tray. For
non‑touch‑screen printer models, press
•
Check the tray length and width guides and make sure the paper is loaded properly in the tray.
•
Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
• Make sure the paper size and type are specified in the Paper menu on the printer control panel.
•
Make sure that the paper size is correctly set. For example, if MP Feeder Size is set to Universal, then make sure
the paper is large enough for the data being printed.
• Cancel the print job.

Insert Tray [x]

Insert the indicated tray into the printer.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:
• From the printer control panel, select Continue to stop the defragmentation and continue printing. For
non‑touch‑screen printer models, press
•
Delete fonts, macros, and other data from the printer memory.
•
Install additional printer memory.

Insufficient memory, some Held Jobs were deleted [37]

The printer deleted some held jobs in order to process current jobs.
Select Continue to clear the message. For non-touch-screen printer models, press

Insufficient memory to collate job [37]

Try one or more of the following:
•
From the printer control panel, select Continue to print the part of the job already stored and begin collating the
rest of the print job. For non‑touch‑screen printer models, press
•
Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Install additional printer memory or select Continue on the printer control panel to disable Resource Save, clear the
message, and continue printing. For non‑touch‑screen printer models, press
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
157