Printing Slows Down; Large Jobs Do Not Collate - Lexmark CS410 Series User Manual

Troubleshooting
Action
Step 4
a
Check if the trays are not linked.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?

Large jobs do not collate

Action
Step 1
a
From the Finishing menu on the printer control panel, set Collate to
(1,2,3) (1,2,3).
b
Resend the print job.
Did the job print and collate correctly?
Step 2
a
From the printer software, set Collate to (1,2,3) (1,2,3).
Note: Setting Collate to (1,1,1) (2,2,2) in the software overrides the
setting in the Finishing menu.
b
Resend the print job.
Did the job print and collate correctly?
Step 3
Reduce the complexity of the print job by eliminating the number and size
of fonts, the number and complexity of images, and the number of pages
in the job.
Did the job print and collate correctly?

Printing slows down

Notes:
•
When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
•
The printer speed may be reduced if printing for long periods of time, or printing at elevated temperatures.
Action
Place letter‑ or A4‑size paper in the tray, and then resend the print job.
Does the print speed increase?
Yes
The problem is solved. Contact
Yes
The problem is solved. Go to step 2.
The problem is solved. Go to step 3.
The problem is solved. Contact
Yes No
The problem is solved. Contact
support.
174
No
customer
support.
No
customer
support.
customer