Configuring Supply Notifications From The Embedded Web Server; Modifying Confidential Print Settings - Lexmark CS410 Series User Manual

Managing the printer
Configuring supply notifications from the Embedded Web
Server
You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their
end‑of‑life by setting the selectable alerts.
Notes:
• You can select alerts for toner cartridges, imaging kit, maintenance kit, and waste toner bottle.
•
All alerts can be set for nearly low, low, and very low supply conditions. Not all alerts can be set for the
end‑of‑life supply condition. E‑mail alert is available for all supply conditions.
• The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some
supply conditions.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Print Settings > Supply Notifications.
3
From the drop‑down menu for each supply, select one of the following notification options:
Notification
Off
E‑mail Only
Warning
1
Continuable Stop
Non Continuable Stop
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
4
Click Submit.

Modifying confidential print settings

Note: This feature is available only in network printers or printers connected to print servers.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
Description
The normal printer behavior for all supplies occurs.
The printer generates an e-mail when the supply condition is reached. The status of the
supply appears on the menus page and status page.
The printer shows the warning message and generates an email about the status of the
supply. The printer does not stop when the supply condition is reached.
The printer stops processing jobs when the supply condition is reached. The user needs to
press a button to continue printing.
1,2 The printer stops when the supply condition is reached. The supply must be replaced to
continue printing.
140