Display Date/Time - Emerson Nfinity 208 User Manual

UPS Configuration Screen - Service Mode Menu
Service Mode contains site identification information about the UPS system. The data is entered by
Liebert Global Services (LGS). To view the data, go to the Main Menu, select UPS Configuration and
press . Next, select Service Mode and press
Main Menu
UPS Status
> UPS Configuration

Display Date/Time

Event Log
Active Alarms
Transfer to Bypass
Module Replacement
Service Tools
UPS Configuration
UPS Configuration
Review Settings
Change Settings
> Service Mode
Service Mode
Service Mode
> Set Site ID
Set Tag Number
Set UPS ID
3.5.3 Display Date/Time
This feature shows the current date and time. At the Main Menu, select UPS Configuration and
press . Next, select Display Date/Time and press
Main Menu
UPS Status
UPS Configuration
> Display Date/Time
Event Log
Active Alarms
Transfer to Bypass
Module Replacement
Service Tools
Display Date/Time
Date/Time
xx/xx/xxxx
mm/dd/yyyy
Set Site ID: Press
menu. Scroll to Set Site ID and press
the screen shown below.
Set Tag Number: Press
Mode menu. Scroll to Set Tag Number and press
to display the screen shown below.
Set UPS ID: Press
menu. Scroll to Set UPS ID and press
the screen shown below.
xx:xx:xx
hh:mm:ss
27
.
to return to the Service Mode
ESC
Service Mode
Service Mode
> Set Site ID
Set Tag Number
Set UPS ID
Set Site ID
-
Service Mode
Service Mode
Set Site ID
> Set Tag Number
Set UPS ID
Set Tag Number
-
to return to the Service Mode
ESC
Service Mode
Service Mode
Set Site ID
Set Tag Number
> Set UPS ID
Set UPS ID
.
Operating Instructions
to display
to return to the Service
ESC
to display