2.3.6
Moving the Battery Cabinets
WARNING
!
Ensure any lifting equipment used in moving the cabinet has sufficient lifting capacity.
Ensure that the weight is within the designated surface weight loading of any handling equipment.
See Table 8 for weight details.
Battery cabinets can be handled by means of a fork lift or similar equipment.
NOTE
Care must be taken when maneuvering units fitted with batteries. Keep such moves to a
minimum.
When the equipment has been finally positioned ensure the adjustable feet are set so that the
battery cabinet will remain stationary and stable.
2.3.7
Cable Entry
Cables enter the battery cabinet from either the top or the bottom. Cable entry is made possible by
removing a blanking piece fitted at the bottom to reveal the cable entry hole.
20
Battery Installation