Configuration Editing Commands - Datalogic GRYPHON Dx30 Reference Manual

REFERENCES
5.8

CONFIGURATION EDITING COMMANDS

The following commands carry out their specific function and then exit the
configuration environment.
Command
Ì$+$*oÎ
Ì$+$!KÎ
Ì$+$&_Î
Ì$+RX0$-qÎ
Ì$+RX1$-vÎ
Ì$+RX2$-{Î
Restore Gryphon™ reader default configuration
(see the relative Quick Reference Manual for
default settings)
Transmit the
Gryphon™ Mx30 Software release
Transmit Gryphon™ reader configuration in
ASCII format.
This command is not effective with Pen
emulation interface or with the Gryphon™ D230
reader model.
Restore OM-Gryphon™ default configuration
(see the relative Quick Reference Manual for
default settings)
Transmit the OM-Gryphon™ Software release.
Transmit OM-Gryphon™ configuration in ASCII
format.
This command is not effective with Pen
emulation interface.
Description
Gryphon™
5
Dx30 or
153