Datalogic GRYPHON Dx30 Reference Manual page 30

4
5.
Read the code above and the four-digit address of the First STAR-System™
6.
Read the code above and the four-digit address of the Last STAR-System™
Whenever the system is composed of a single base station, the
first and last bas
the same value.
NOTE
7.
END of procedure.
YOUR READER IS NOW READY TO R
To change the defaults see par. 4.8.
20
First STAR-System™ Address
ÌRSRÎ
device in the system.
Set Last STAR-System™ Address
ÌRTTÎ
device in the system.
e station addresses (steps 5 and 6) must have
Exit and Save Configuration
Ì$-?Î
EAD BARCODES.
GRYPHON™ Dx30/Mx30