Datalogic GRYPHON Dx30 Reference Manual page 26

4
Read the Bind code to pair the Gryphon™ Mx30 to the OM-Gryphon™ cradle.
5.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
To connect several readers to the same cradle see the following paragraph
4.4.1, 'Using Multiple M Series Readers with Same Cradle'.
The green LED on the Gryphon™ Mx30 will blink; the reader is ready to be
positioned onto the cradle.
Firmly position the reader onto the OM-Gryphon™ cradle within 10 seconds, a
6.
beep will be emitted, signaling that the OM-Gryphon™ cradle has been paired
to the Gryphon™ Mx30, and the green LED on the reader will go off.
Green LED
Read the OM-Gryphon™ restore default code:
7.
Go to par. 4.6 Interface Selection.
16
Bind
Ì$+RN0$-IÎ
Restore OM-Gryphon™ default
Ì$+RX0$-qÎ
GRYPHON™ Dx30/Mx30