Replacing Gryphon™ M Batteries - Datalogic GRYPHON Dx30 Reference Manual

INSTALLATION
2.8.3 Replacing Gryphon™ M Batteries
To change the batteries in your Gryphon™ Mx30 scanner, proceed as follows:
1.
Unscrew the battery cover screw.
2.
Open the battery cover.
3.
Replace the
ones, then screw the battery cover
back in to pla ce.
Do not incinerate, disassemble, short terminals or expose to
high temperature. Risk of fire, explosion. Use specified
charger only. Risk of explosion if the battery is replaced by
an incorrect type. Dispose of the batteries as required by the
WARNING relevant laws in force.
old batteries with new
Battery
Cover
-
NiMh, or Alkaline AA Batteries
2
Battery
Cover Screw
+
9