Datalogic GRYPHON Dx30 Reference Manual page 126

4
After selecting the predefined match code, read the character(s) from the HEX table. Range
of characters = 01-FE.
Example:
Match code with the 2-character predefined string = "@@".
AND
Read the above code + two numbers in the range 01 to 99 representing the character
position in the code where the first character of the predefined string must be found.
Read 00 if the match string can be found in any character position.
116
ADVANCED FORMATTING
Match with Predefined Characters
no match
ÌHD0HE00ÄÎ
match with 1 character
ÌHD1]Î
match with a 2-character string
ÌHD2`Î
match with a 3-character string
ÌHD3cÎ
match with a 4-character string
ÌHD4fÎ
Match with a 2-character string
Read
position of first character in predefined string
ÌHE,Î
OR
+ 40 + 40
Exit and Save Configuration
Ì$-?Î