System And Radio Features; Status Indicators - Datalogic GRYPHON Dx30 Reference Manual

6
6.4

SYSTEM AND RADIO FEATURES

Radio Features
Working Frequency
Bit Rate
Range (in open air)
RF Modulation
System Configurations
Maximum number of devices per
base stations
Maximum number of devices in the
same reading area
Maximum number of base stations
in network
6.5

STATUS INDICATORS

The reader has three indicators, LED, Beeper and Good Read Spot. The
OM-Gryphon™ and C-Gryphon™ cradles have three indicator LEDs. They signal
several operating conditions which are described in the tables below.
H = high tone
GRYPHON™ Dx30/Mx30 READER START-UP
¹
Beeper
L L L L
H H H H
long tones
H L H L
GRYPHON™ Dx30/Mx30 READER CONFIGURATION
¹
Beeper
H H H H
L
L L L
162
Meaning
Parameters loaded correctly
Parameter loading error, reading or writing error in the non volatile
memory
Hardware error in EEPROM
Meaning
Correct entry or exit from Configuration mode
Good read of a command
Command read error
433.92 MHz
OM-GRYPHON™
16
-
GRYPHON™ Dx30/Mx30
19200
30 m
FSK
STARGATE™
255
2000
16
L = low tone