Web settings
(Continued)
z INCOM/MIC Screen
z
This menu is used for the unit's intercom settings .
Configure the camera's intercom setting on the camera .
indicates the factory default setting .
Setting
Item
value
4W/RTS
–40 .0dB
IN LEVEL
│
0dB
│
20 .0dB
4W/RTS
–40 .0dB
OUT LEVEL
│
0dB
│
20 .0dB
RTS CANCEL
–40 .0dB
│
31 .5dB
GAIN PGM
0dB
20dB
MIC LEVEL MIC1
–40 .0dB
│
0dB
│
20 .0dB
MIC LEVEL MIC2
–40 .0dB
│
0dB
│
20 .0dB
CM/DM
CM
DM
CCU INCOM MIC
–40 .0dB
│
0dB
│
12 .0dB
CCU SIDE TONE
–40 .0dB
│
–6dB
│
0 .0dB
Remarks
Set the input level for the intercom
(4-WIRE and RTS) signal .
(0 .5dB increments)
Set the output level for the intercom
(4-WIRE and RTS) signal .
(0 .5dB increments)
Set the noise canceling level for the
engineering intercom (RTS system) .
(0 .5dB increments)
Set the gain for the PGM sound .
Finely adjust the level of output from the
MIC OUT 1 connector .
(0 .5dB increments)
Finely adjust the level of output from the
MIC OUT 2 connector .
(0 .5dB increments)
Use this to select the type of intercom
microphone (carbon microphone or
dynamic microphone) to be connected
to the unit .
CM: Carbon microphone
DM: Dynamic microphone
Use this to set the level of the unit's
intercom microphones for regular use .
(0 .5dB increments)
Use this to set the side tone level of the
unit's intercom for regular use .
(0 .5dB increments)
Items when the MAINTENANCE menu is
selected
Display the START UP screen .
Display the ANALOG GAIN screen .
Display the ND NAME screen .
Display the NETWORK screen .
Display the VERSION screen .
Display the PM VIEW SETTING screen .
Display the PM OPERATION STATUS screen .
Display the SYSTEM screen .
31